Sigma Corporation - Cream Ridge, NJ

2"-48" C153 DI MECHANICAL JOINT (CL350)

SPECIFICATIONS

MATERIAL: Ductile Iron ASTM A536 Grade 60- 42-10 or 70- 50-05
PRESSURE: 350 PSI Water Working Pressure (CLASS 350) 3 ”-24”: 250 PSI 30”-48”
TESTING: In accordance with ANSI / AWWA C153 / A21.53 & UL - FM requirements.
LAYING LENGTH: Short body design-straight section of body reduced to provide a compact and lighter fitting without reducing strength or flow characteristics, in accordance with ANSI / AWWA C153 / A21.53 (3”-48”)
CEMENT LINING: In accordance with ANSI / AWWA C104 / A21.4
COATING: Seal coated (asphaltic material) inside and out in accordance with ANSI / AWWA C104 / A21.4 and NSF61 approved
GASKETS: SBR In accordance with ANSI / AWWA C111 / A21.11. Alternate material gaskets for special applications available
T-BOLTS: Low alloy corrosion resistant high strength steel in accordance with ANSI / AWWA C111 / A21.11
APPROVALS: Underwriters Laboratories listed and Factory Mutual Approved.
STANDARDS: Certified to NSF 61 Standard
ANSI / AWWA C153 / A21.53 for Compact Ductile Iron Fittings 3 ”-48” for water and other liquids
2-24" Also available in Fusion Bonded Epoxy

3"-24" C153 DI TYTON® JOINT (CLASS 350) - "TRIM TYTON®"

SPECIFICATIONS

MATERIAL: Ductile Iron ASTM A536 Grade 60-42-10 or 70-50-05
PRESSURE: 350 PSI Water Working Pressure (CLASS 350)
TESTING: In accordance with AWWA C153 (ANSI A21.53), FM, & UL requirements
LAYING LENGTH: Short body design - straight section of body reduced to provide a more compact and less heavy fitting without reducing strength or flow characteristics, in accordance with AWWA C153 (3"-24")
CEMENT LINING: In accordance with AWWA C104 (ANSI A21.4)
COATING: Seal coated (asphaltic material) inside and out in accordance with AWWA C104 (ANSI A21.4)
GASKETS: SBR in accordance with AWWA C111 (ANSI A21.11)
APPROVALS: 3"-12" Underwriters Laboratories Listed and Factory Mutual Approved
STANDARDS: AWWA C110 (ANSI A21.10-88_ for Ductile Iron Fittings 3"-16" for water and other liquids.
2-24" Also available in Fusion Bonded Epoxy

TYTON and TRIM TYTON are registered trademarks of the United States Pipe and Foundry Company

2"-48" FULL BODY MECHANICAL JOINT

SPECIFICATIONS

Download Catalog

MATERIAL: Cast Iron ASTM A48 Class 30B Ductile Iron ASTM A536 Grade 60-42-10 or 70-50-05
PRESSURE:
Ductile Iron 3" - 24", 350 PSI Water Working Pressure
Ductile Iron 30" - 48", 250 PSI Water Working Pressure
TESTING: In accordance with ANSI / AWWA C110 / A21.10
LAYING LENGTH: In accordance with ANSI / AWWA C110 / A21.10
CEMENT LINING: In accordance with ANSI / AWWA C104 / A21.4
COATING: Seal coated (asphaltic material) inside and out in accordance with ANSI / AWWA C104 / A21.4 and NSF61 approved
GASKETS: SBR In accordance with ANSI / AWWA C111 / A21.11. Alternate material gaskets for special applications available
T-BOLTS: Low alloy corrosion resistant high strength steel in accordance with ANSI / AWWA C111 / A21.11
APPROVALS: 3"-12" Underwriters Laboratories Listed and Factory Mutual Approved
STANDARDS: ANSI / AWWA C110 / A21.10

4" - 12" CI/DI, CLASS 250 (CI) / CLASS 350
16" - 24" CI/DI, CLASS 150 (CI) / CLASS 250 (DI) FULL BODY PUSH-ON

SPECIFICATIONS

Download Catalog

MATERIAL: Ductile Iron ASTM A536; Grade 70-50-05 or 60-42-10
Cast Iron ASTM A48; Class 30B
PRESSURE: DI: 4" - 24" 350 psi WWP (2415 k Pa)
CI: 4" - 12", 250psi WWP; 14"-24"; 150 psi WWP
TESTING: In accordance with AWWA C110 (ANSI A21.10)
LAYING LENGTH: All Laying Lengths and Metal Thickness to AWWA C110 (ANSI A21.10)
CEMENT LINING: In accordance with AWWA C104 (ANSI A21.4)
COATING: Seal coated (asphaltic material) inside and out in accordance with AWWA 104 (ANSI 21.4) and NSF61 approved
GASKETS: SBR in accordance with AWWA C111 (ANSI A21.11)

2" - 54" CAST IRON/DUCTILE IRON FLANGED

SPECIFICATIONS

MATERIALS: Cast Iron: ASTM A48, Grade 30B
Ductile Iron: ASTM A536 Grade 60-42-10 or 70-50-05
PRESSURE RATING: 250 PSI Water Working Pressure for Cast Iron sizes 2" - 54"
TESTING: In accordance with AWWA/ANSI C110/A21.10 where applicable.
Other items are in accordance with Manufacturer’s standards.
LAYING LENGTH:In accordance with AWWA/ANSI C110/A21.10 where applicable.
Other items are in accordance with Manufacturer’s standards.
CEMENT LINING: In accordance with AWWA/ANSI C104/A21.4.
COATING: Seal coated (asphaltic material) inside in accordance with AWWA/ANSI C104/A21.4. and NSF61 approved
Red primer outside.
For special conditions, other types of coatings and linings are available.
Please specify when ordering.
APPROVALS: 3" - 12" Underwriters Laboratories listed and Factory Mutual approved.
STANDARDS: AWWA/ANSI C110/A21.10 where applicable. Other items are in accordance with Manufacturer's standards.
2-24" Also available in Fusion Bonded Epoxy

SIGMA EPOXY COATED C153 DI FITTINGS

SPECIFICATIONS

SIGMA Epoxy Coated Fittings are NSF61 approved for potable water applications
SIGMA Epoxy Coated Fittings meet or exceed ANSI/AWWA C550 and C116/A21.16 standards (PROTECTIVE FUSION-BONDED EPOXY COATINGS FOR THE INTERIOR AND EXTERIOR SURFACES OF DUCTILE-IRON AND GRAY-IRON FITTINGS FOR WATER SUPPLY SERVICE)
SIGMA Epoxy Coated Fittings have a minimum coating and lining thickness of 8 mils on the body
HB Fuller supplied Fusion braded Epoxy powder – NSF61 approved

ATTRIBUTES

Available from 2 ”- 24”
This coating has a successful long history of use in the waterworks industry on fire hydrant components, check valves, resilient wedge seated gate valves, and many more industrial valves
Provides a smooth inner surface with less frictional losses
Epoxy coating allows for use in many wastewater applications